Boeing Model 157B

aircraft, art, history, projects Add comments

Jun 042020

A 1966 Boeing concept for a civilian version of the Chinook. Viet Nam veterans I’ve known who rode in Chinooks of that era have stories that make me suspect that *substantial* structural stiffening would have been required for such a craft to be fully accepted by the public; apparently, looking forward towards the cockpit and watching the while cabin twist back and forth was slightly disconcerting. A cruise speed of 200 mph seems slightly optimistic.

The Unwanted Blog

More 3D prints May 7, 2024
1/350 War Rocket, 1/18 Pulse Units, 1/18 Atomic Artillery Shells. The War Rocket was modified & printed from a file created for Fantastic Plastic. Their version – currently available – is in much larger 1/144 scale. I was impressed with the tiny details that this smaller print picked up, but the wings are […]
1/18 3D printed A-Bombs April 30, 2024
I’ve printed off two more Fat Man bombs in 1/18. I can see where improvements can be made to the CAD model, but as is they’ll build up into spiffy little pieces. Right now I’ve got 2 Fat Man, 2 Little Boy hopefully to sell to help defray costs; if there is interest I […]
3D print results April 27, 2024
I’ve been running the 3D printer, with mixed results. Failures and disappointments are the fault of the CAD models; the printer itself (Anycubic Photon Mono X 6Ks) is working as advertised. Printing is not a fast process; some prints took 12 hours. Some early results with the 3D printer. First up: some 1/144 and 1/285 […]
Ballpoint Pen Bombers April 23, 2024
This is a little outside the usual for APR, as it is satire rather than actual aerospace design. But I thought it appropriate nonetheless; I remember dreaming up just about the exact same ideas when I was twelve. There was something about the design of those pens that just *screamed* for them to be envisioned […]
3D Printer incoming… April 22, 2024
I went ahead and ordered an Anycubic Photon Mono X 6Ks. The reviews are good and the price was ok; I have high hopes that it won’t be a monumental learning curve, but I guess I’ll find out. i expect I’ll be watching a fair number of YouTube tutorials. The CAD models I’ve made […]
Minis visualized April 20, 2024
Here are some hypothetical subjects for metal casting as “minis.” I have three pages (standard 8.5X11) of diagrams, all depicting possible subjects at the size they would be at the stated scales. First page shows what I consider a number of interesting designs… not at a constant scale, but size. Second page […]
Little Metal Excelsiors April 16, 2024
I’ve achieved a measure of success with getting metal casting up and running. I don’t intend to make too many of these NX-Excelsiors; they’re practice. But I have some spares and can make some more. Anyone interested? Say, $20 plus postage? It is my intention to make some NCC-2000 Excelsiors, and then some NCC-1701-B Enterprises. […]
Gyrojet in high speed/high rez April 11, 2024
For all the documentaries and such about the 1960’s Gyrojet “rocket gun,” this is the first time I’ve seen rounds fired with this sort of clarity. The rounds cost $200 each… which once again makes me wonder why someone hasn’t decided to put them into production. If there’s a market for them at $200 each, […]
Bell-Boeing LHX Tiltrotor art April 8, 2024
Artwork circa 1983 depicting a one-man combat tiltrotor tearing up a column of Soviet armor. At this time the Light Helicopter – eXperimental program included the possibility of tiltrotors as well as conventional choppers. In the end the RAH-66 won… and was then cancelled before series production. Tiltrotors showed promise, but also promised to be […]
Metal casting April 7, 2024
Some thirty or so years ago I took a stab at casting small parts and models in metal… my very early 1/144 lifting bodies, X-20, etc. The results were sad, so the project was abandoned. For reasons that evade me I’ve recently decided to try again. Materials available to me today are much better… high […]