Sep 012024
 

The rewards went out this AM bright and early. They include:

Diagram: Two sheets of Rocketdyne schematics for the Space Shuttle Main Engine and propulsion system

Document: “B-1B New Strength for America’s Defense” An early 80’s brochure on the then-forthcoming B-1B

Document: “Aerojet propulsion for Space Systems,” a very nicely illustrated booklet on the AJ10-137, the main engine of the Apollo CSM

Document: Two articles in French on VTOL Aircraft from the ICARE revue De L’Aviation Francaise “Salon 69”

CAD Diagram: WIP of the Boeing Model 2000-201 VTOL stealth spec ops transport

 

If you are interested in helping to preserve this sort of aerospace history, consider signing up for the APR Monthly Historical Documents Program for as little as $1.50 per month:

https://www.aerospaceprojectsreview.com/monthly.htm

 

 Posted by at 2:32 pm
Apr 192024
 

Here are some hypothetical subjects for metal casting as “minis.” I have three pages (standard 8.5X11) of diagrams, all depicting possible subjects at the size they would be at the stated scales. First page shows what I consider a number of interesting designs… not at a constant scale, but size.

 

 

 

Second page depicts a range of Project Orion vehicles again at a roughly constant size. Constant size means, hopefully, a consistent cost.

 

Third page shows two sets of 8. The US Bomber Projects #1 set has 8 bombers at roughly constant size; US Fighter Projects #1 set has the fighters all at the same scale. 1/285 at least used to be a kind of standard for wargaming, though I’m not sure how widespread it truly was.

 

Sets like USBP01 would probably all be at about the same price, but those like USFP01 might vary since some designs at quite a bit bigger. What I’m kinda hoping for is the individual minis being about $25 each, while the 8-sets be about $100 each. Thoughts?

 

These are of course not the full possible catalog, nor would all these here necessarily come to pass. And scales/sizes could vary substantially. A lot of it would depend on actually trying them and see what works, what fails spectacularly.

 Posted by at 7:47 pm
Jan 222024
 

With all the little publications I’ve written and illustrated, and all the years of blogging ABSOLUTELY BRILLIANT political opinions and the like, it seems that at least *one* of my efforts will go down through the ages: my design for the Orion Battleship. We know to a fair certainty that such a craft was designed in the early 1960s, and that a mockup the size of a car was built; we know some of the components and features of that design. But other than that… we don’t know much. The overall size and configuration are unknown. So, fifteen years ago when I was working on an article for Aerospace Projects Review about large Orion vehicles, I went ahead and made a speculative reconstruction design. I did my best with what was available… and in the years since, nothing seems to have come out to refute the design. I do not contend that the design is an accurate reconstruction; I was never able to get in touch with anyone who knew the Battleship design first-hand to confirm my reconstruction. I could well be *badly* wrong, especially since the descriptions of the original design tend to be second-hand. One day we might find out for sure.

But in the years since I showed my design to the world, I’ve seen it recreated here and there. It seems to be the accepted Actual Design.

Huh.

Behold:

That second video uses a model based on my design, more renders of which are HERE.

Shipbucket:

A purchasable 3D printed, lower fidelity copy of my design on Etsy:

 

My renders – unimpressive even by 2009 standards – even made it into meme format:

If you want to see the Orion Battleship as I designed it in its original format, check out Aerospace Projects Review issue V2N2.

 Posted by at 12:41 am
Sep 012023
 

The rewards for August, 2023, have been released. They include:

Document: Report No. ZD-013, “Preliminary Detail Specification for United States Navy Class VP Long Range Patrol Seaplane,” Convair, 1 April 1946

Document: “Space Shuttle: What Will It Do?” A 1970’s brochure describing the Shuttle, with six full-color full page illustrations

Art: McDonnell-Douglas lithograph of “NASA Earth Orbital Space Station”

CAD Diagram: Northrop Grumman Next Generation Long Range Strike

 

If you would like to help fund the acquisition and preservation of such things, along with getting high quality scans for yourself, please consider signing on either for the APR Patreon or the APR Monthly Historical Documents Program. Back issues are available for purchase by patrons and subscribers.




 

 

And as happens far too often, I’ve been remiss in my PR campaign. The rewards for July, released a month ago, included:

Document: “C-5 Galaxy Pocket Guide,” brochure giving info on the C-5

Document: GDIC-64 O29-21, “Alighting Gear Convair Model 48 Light Armed Reconnaissance Airplane,” an illustrated report on the landing gear for Convairs competitor for the OV-10

Document: “Police Department Lecture #3 Effects of Atomic Weapons,” an early-50’s paper describing what NYC could expect int he event of a nuclear strike

Diagram: EMW “Wasserfall,” German WWII surface to air guided missile

CAD Diagram: Boeing 2707-100-derived bomber

 

 Posted by at 1:43 am
Jun 062023
 

I put one copy of each of my current books on ebay. They’re all in brand-new condition, and will be signed/dated when sold. They also come with bonus 18X24-inch prints… the “SR-71” book has two prints of the SR-71, the “B-47/B-52” book has one B-47 diagram and two B-52 diagrams; “US Supersonic Bomber Projects Vol. 1” has two B-70 Valkyrie diagrams. Take a look…

 

Lockheed SR-71 Blackbird (Origins and Evolution): Signed, with bonus prints

Boeing B-47 Stratojet and B-52 Stratofortress: Signed, with bonus prints

US Supersonic Bomber Projects Volume 1:  Signed, with bonus prints

 

 Posted by at 11:36 pm
Mar 282023
 

The first US Aerospace Projects in *years* is now available. Cover art was provided by Rob Parthoens, www.baroba.be

US VTOL Projects #3

US VTOL Projects #3 is now available (see HERE for the entire series). Issue #2 includes:

  • Lockheed CL-579: An optionally-manned “communications satellite” for after WWIII
  • Vanguard Model 18: A short range passenger transport from the 60s with slightly unusual wings
  • Hiller STORC: A helicopter that could convert into a conventional aircraft for long-range ferry flights
  • North American Rockwell NR-356 Sea Control Fighter: The design that led to the failed XFV-12A
  • Bell D181: One of the first VTOL “assault transports”
  • Hiller Anti-Submarine Warfare Drone Tailsitter: An unmanned pulsejet-powered torpedo-launcher
  • Gates Twinjet: An ill-timed executive transport helicopter
  • McDonnell Douglas VT107-4-4I: A short-range VTOL jetliner from the early 70s

While this issue covers the usual eight designs, note that it’s about 50% longer than similar, earlier issues. The delay in publication was due in large part to working on several book… and working on several books seems to have led me to be more verbose in my descriptions. So hopefully this means a better product!

 

 

 

 

USVP #3 can be downloaded as a PDF file for only $5.25:

——–

 Posted by at 8:18 am
Mar 252023
 

After a delay of several years, I’m back to working on my own little publications. Since the delay was caused by working on actual published *books,* I like to think that I’ve gotten a bit better. Thus the next issue of US VTOL projects has about twice the text of the prior issue, and the diagrams are a bit better. To get best use of the diagrams, I’m reviewing how they are being incorporated into the final text. The link below is a test PDF with four pages… each page has the same illustration, but with variations in resolution, line weight, etc. I’m interested in what looks “best.” So take a look and let me know which page – if any – looks best on screen, and if possible printed out.

 

https://www.dropbox.com/s/jy8tbvrgje464v7/test.pdf?dl=0

 Posted by at 6:13 pm
Mar 102023
 

I will be posting some more cyanotype blueprints to ebay in the coming days. These were made from old transparencies I’d had made prior to the move from Utah. But I also hope to have some “brand new” cyanotypes in the near-ish future. The transparent film remains astonishingly elusive; two separate companies are trying to obtain it… and have been for a few months now. Every other print shop in the area has flat refused to try. A print shop a few hundred miles away made a few transparencies for me a few months back; I just sent them files to have a few more made. With luck they’ll come through. I have a *bunch* more I’d like to have done. Here are what I recently sent off:

Martin XB-51. The original print was 1/40 scale; this blueprint will be 1/72 scale.

The Avro “Arrow” structural layout.

Two sheets from NASA illustrating the Saturn V.  One sheet is very likely more interesting than the other, so what I might end up doing is ebaying the two sheets and cataloging just the one.

The US-1205 and UA-1207 solid rocket motors for the Titan IIIC and IIIM, respectively. I have the originals of these framed and hanging on my wall; conveniently, they fit in off-the-shelf 11.75X36 panorama frames that you can get at Hobby Lobby and the like. I will probably tinker with some of the other blueprints that are *close* to this size to massage them to fit into that frame. Because as awesome as the prints are on their own, they’re spectacular framed.

I have also sent a revised version of my SR-71 CAD diagrams to be re-printed. The first print’s lines came in too light/fine. Live and learn…

 

 Posted by at 6:34 pm
Jan 202023
 

I just sent files to the print shop to get transparencies of two new cyantypes. One will be a pair of 18X24 SR-71 CAD drawings by yours truly, and one will be a 12X38 vintage USS Monitor diagram. I kinda plan on doing a range of ships and submarines, based on vintage blueprints and Booklets of General Plans, if they prove popular. If interested in these, or interested in suggestions something, let me know.

 Posted by at 8:30 pm
Jan 022023
 

The December 2022 rewards are available for APR Patrons and Subscribers. This latest package includes:

Large Format Diagram: AWACS model diagram

Document: “Preliminary Design of a Mars Excursion Module,” 1964 conference paper, Philco

Document: “Astronauts Memorial” 2 diagrams

Document: “Patrol Reconnaissance Airplane Twin Float,”  Convair brochure (via photos), 1944. Two piston engines, two turbojets

Document: “Hard Mobile Launcher,” Martin Marietta PR, two images. One photo, one artists impression

Document: “JVX Space Proposal” apparently a fragment, 1984 Bell maps of manufacturing facilities for what would become the V-22

Document: “Minimum Man In Space,” 1958 NACA memo describing proposals made to Wright Air Development Center for what would become the Mercury program

If you would like to help fund the acquisition and preservation of such things, along with getting high quality scans for yourself, please consider signing on either for the APR Patreon or the APR Monthly Historical Documents Program. Back issues are available for purchase by patrons and subscribers.




 

And because I forgot to post about it at the time, the November 2022 rewards were made available a month ago:

Large Format Diagram: B-50A Superfortress Model Diagram

Document: “Design Study of a One Man Lunar Transportation device,” 1964 North American Aviation conference paper on a rocket “hopper”

Document: “Project EGRESS (Emergency Global Rescue, Escape and Survival System),” 1964 Martin conference paper on ejection capsule for aerospacecraft

Document: “The Hydrogen Fueled Hypersonic Transport,” 1968 Convair conference paper

CAD Diagram: Mach 3 turbojets: Allison 700 B-2 (J89), GE YJ-93-GE-3 (cutaway), P&W J58

If you would like to help fund the acquisition and preservation of such things, along with getting high quality scans for yourself, please consider signing on either for the APR Patreon or the APR Monthly Historical Documents Program. Back issues are available for purchase by patrons and subscribers.




 Posted by at 10:54 am