Jan 312023
 

The Dem-dominated government of the state of Illinois passed an “assault weapon ban” that bans not only commonly owned firearms but also standard capacity magazines as part of their policy of decriminalizing violent crime while criminalizing the law abiding. But the law was so badly written – and badly conceived – that I wonder if the inevitable boomerang effect might end up with Illinois finally entering the twenty first century and ditching *all* of the unconstitutional tyrannical nonsense that has been on the books. Consider:

Appellate Court Affirms DeVore’s Equal Protection Argument, Assault Weapons Ban Temporary Restraining Order, Binds Courts Statewide

The ban on common rifles is clearly unconstitutional on second amendment right… but it’s *also* unconstitutional – state and federal – on “equal protection” issues. Because while it bans *some* people from owning, say, an AR-15, it exempts current and retired police, current military and security guards. The point is often raised that the same politicians who rail against average schmoes being able to defend their homes, persons and property with a semi-auto rifle often have armed guards packing semi and even full auto weapons.

One can hope that the court smackdown of the “assault weapon ban” will hit so hard that other existing gun laws in Illinois will be brought down. By over-reaching, the gun-grabbers might well have assured that all gun control laws across the US end up before the US Supreme Court. It would be spectacular if the NFA winds up going the way of the dodo, as it should. There are few enough arguments that support banning fully automatic weapons; there are none for bans on suppressors and short barreled rifles and shotguns.

 Posted by at 11:33 pm
Jan 312023
 

A concept illustration of a an attack bomber by Bell Aircraft. No further info than the picture; this would seem to date from the very late 1930’s or early 40’s. As illustrated it’s lopsided… radial engine (Wright R-2600) on the starboard wing, inline (Allison V-1710-F-2) in the port wing. This would indicate engine possibilities, not schizophrenic designers. The forward fuselage is fully glazed and geometrically unbroken; the result is something like the Heinkel 111.

 Posted by at 8:05 pm
Jan 302023
 

Interesting if true. A 5.9 magnitude earthquake as a direct result of an explosion would indicate a yield on the order of one megaton. more likely would be a sizable *bang* near a fault line, which would be stupid in its own right. The epicenter was apparently a number of kilometers below the ground, so it was almost certainly a perfectly natural quake… but hardly impossible that it was triggered by a sizable explosion.

 

 

 

 Posted by at 8:00 pm
Jan 292023
 

Once again, virtually inevitable technology. And once again, people are dreaming up terrible uses for it. In this case, brain wave monitoring devices to track your mind while on the job to make sure that:

1) Your mind doesn’t wander from the task

2) That you don’t think about other employees

3) That you don’t make plans with other employees for things the company doesn’t want

 

 

 

Any tech like this that can be legally allowed to be mandated by an employer is tech that a government can make legally mandatory for all subjects.

 

 Posted by at 8:56 pm
Jan 292023
 

“Creature Features,” a YouTube channel that shows less-than-spectacular movies interspersed with segments with a trio of characters (a format made popular on TV decades ago with the likes of Elvira), found a better-quality copy of the movie “Meteor.” It remains a *terrible* movie with atrocious visual effects and models that can’t even be considered half-assed. But it somehow is rather entertaining. I remain vaguely interested in the notion of someone doing a Special Edition where all the model shots are replaced with insanely good CGI, maybe even tinker with the other visual effect. Ain’t nuthin’ gonna help the plot, though.

 

 Posted by at 2:44 pm
Jan 282023
 

The hardware has been modified to “print” up to the full six feet in length (actually a little more, maybe 6’8″). I continue to crank out test prints, with about a 50/40/10 mix of “awesome”/”disappointing”/”dismal.” Now it seems the production part of the project is largely dialed in; it seems that *chemistry* is responsible for much of the trouble. There is a window in which the fluid can be properly used:

  1. When the two chemicals are first mixed, they produce a liquid that is mud-brown. When used right off, it doesn’t seem to stick to the paper very well, or doesn’t react adequately. In any event, the result is massively faded. Wholly unusable. It seems to take about 24 hours from mixing to reliable usability. After 24 hours, the fluid has turned from brown to dark-ish green. Seems to work great at about that point. After another day, it turns a *dark* green, then trends towards blue. As it goes, it becomes increasingly useless. So there is a 24-48 hour window, it seems. I can work with that, now that I got it more or less figgered.

 

While the hardware is set up for in excess of 6 feet, so far the biggest print I’ve done is 56 inches, a *spectacular* pair of isometric interior structure views of the B-2A. yeah, I’m a bit surprised that the original was declassified, but it was, so there it is (and it was sent to me by a Russian feller, so it’s out there). I’ve done 2 so far… one is as close to perfect as I can hope for; one is *slightly* flawed via faded bits.

 

When I left Utah, my cyanotyping hardware got trashed. But I had the foresight to roll up all the transparencies I had. And wow, I have a lot of them. And WOW are they dirty. Utah is great and all, but it *is* the desert and full of dust… it’s coarse, rough, irritating, and it gets everywhere. All of the transparencies will have to be washed and windexed. And I’ve washed, but not yet windexed, the first of the six-footers I plan on printing: a CAD diagram of my own, the SLS in 1/72 scale. A good businessman would have had this ready for the Artemis mission a little while ago but… shrug.

 

These test prints will probably go up on ebay to get some sense of the interest in them. I suspect an Etsy store would be the best next step. There are a *lot* of crappy digitally printed aerospace “blueprints” there… one of the very first ones to pop up is a digitally printed 12″x72″ Saturn V that almost certainly was derived from Space Drawing 4.  I previously sold actual cyanotypes of this at the exact same size… for $50 compared to the digital print at $75. I feel rather like a chump. There are actual cyanotype prints available as well, but the one’s I’ve seen all look rather bland and low-effort. Bah.

 Posted by at 1:09 pm
Jan 282023
 

Urgent public health warning issued over lost radioactive capsule in Western Australia

The capsule fell off a truck somewhere along a 1,400 kilometer trip. What they’re hoping to find:

 

 

Any motorists who have travelled along the Great Northern Highway between Newman and Perth since January 10 should check their tyres, in case the capsule has become lodged in them.

 

Yeah. Good luck with that.

 Posted by at 11:01 am
Jan 272023
 

Granted, there are people who actually *work* at shopping malls. But these “tours” of the Google offices in LA really don;t seem like tours of work sites. There are not a whole lot of people in evidence, and the vast majority of those seen doing something are shown relaxing, playing, eating, drinking.

 

I’m sure hiring a large percentage of the workforce to simply tick quota boxes seemed like a good idea to *somebody.*

One might wonder why I’m suddenly yammering on about this. I think it’s because this sort of thing offends me… it’s not that “work” should be an oppressive, dreary existence (been there), but because works should be about The Work. Granted I used to be an aerospace engineer, not a software worker; if Google’s latest update is a little wonky, who cares. If the latest jetliner is a little wonky, people *die.* So industries that actually matter should take themselves seriously. No goofy TikTok dance videos, no on-site clowns or cry-closets. The things that made our society successful have in recent years been not only neglected but denigrated. This has included objectivity, being on time, having a good work ethic, recognition of cause and effect and so on. I see these adult daycare centers as part and parcel of this. The people who work there seem to *not* actually work there. Granted *somebody* has to be doing the job; Price’s Law suggest that the square root of the number of employees are doing half the actual work. Regardless of how true that is, any place where *anything* gets done has to have some people who are actually working. And surrounding hard workers by slackers who are getting paid just as well as them and who are visibly being coddled… that has *got* to be a morale-killer among the productive. And doubtless many of the slackers would have turned into hard workers who would derive great and substantive meaning from being productive… but they’re being indoctrinated into a culture of bland excess and sloth.

 Posted by at 11:27 am