Jul 092015
 

Rockwell art of an early Shuttle configuration. The full-rez version has been made available for $10-level patrons at the APR Patreon.

While this is broadly much like the STS as actually built, there are a lot of important differences. The spine down the top of the cargo bay… that was to give room for the cargo manipulator arm without putting it actually in the cylindrical bay, taking up valuable cargo space. The booster rockets have teardrop ports on the cylindrical sections just aft of the nosecones… these are the thrust termination ports that, in the event of an abort, would blow out through the forward dome of the rocket motors. This would not only slash the chamber pressure in the motors, it would provide an escape route for the hot gas to go forward, cancelling the thrust from the aft nozzle. The ET is of a slightly simpler geometry; the small cylinder on the nosecone contained the de-orbit solid rocket motor (because the ET would either go into orbit with the Shuttle, or so close to orbit that the splashdown location would be somewhat randomized).

Old Shuttle Art - Launch

 Posted by at 12:49 pm