A General Dynamics concept for a logistics spacecraft (personnel and cargo transfer to/from space stations) from 1966. The VL-3A was a narrow lifting body design to be launched by a Titan IIIc, and featured flip-out wings and turbojets for runway landings. The VL-3A and other spaceplanes were presented in US Spacecraft Projects #2.
I’m looking for good diagrams of the Lockheed XF-90, especially cross-sections of the fuselage. Here’s where it gets a little weird: I need to be able to accurately 3D CAD model the XF-90… but it’s not for an XF-90 kit.
More later (of course, the first to provide such diagrams gets the full lowdown on what’s up).
An illustration showing the interesting high temperature materials used on the 1960’s ASSET re-entry lifting test article.
Some future releases in the PDF-diagram line. Obviously some are a little further along than others, and some will be multi-sheet diagrams…
I’ve recently figured out how to get reliably good-quality vector graphic PDF files from my AutoCAD diagrams.These differ from standard “raster” graphics like GIFs and JPGs in that they are composed of scalable lines rather than pixels; this means that they can be printed off at many scales and they’ll retain clarity.
I think a lot of the diagrams would look quite good printed in large format; I’ve previously mentioned that I’m working on a few diagrams specifically for printing off on large format (24X36) mylar, but I’ve others that I think would also look good scaled for 18X24. I’m making these first seven diagrams available, formatted and scaled for 18X24. They can be viewed on screen, printed on a standard printer or printed by a large format printer all with equal clarity.
If this idea appeals, be sure to tell your friends, family, foes, anyone you think might be interested. Also be sure to comment if there are any diagrams I’ve previously created for APR, USXP or elsewhere that you’d like to see in this format. Some of them would be best as multi-sheet diagrams. Suggestions on how to improve also appreciated.
CAD 007: Northrop Low Altitude Penetrator
A 1/72 diagram of a 1979 design for a B-2 alternate configuration
Download for $3
———————————
CAD 006
A 1/96 scale diagram of the 1979 Rockwell D645-4a spanloader bomber.
Download for $3
CAD 005
A 1/144 scale diagram of the Manned Spacecraft Center MSC Orbiter 020, a 1972 Space Shuttle concept with a single 260″ solid rocket booster.
Download for $3
CAD 004
A 1/350 scale diagram of the 1971 Boeing Resource Air Carrier (AKA RC-1, AKA “Brute Lifter”) designed as a flying oil tanker for the arctic.
Download for $3
CAD 003
A 1/72 scale diagram of the Martin-Marietta “Zenith Star” experimental space-based laser for the Strategic Defense Initiative.
Download for $3
CAD 002
A 1/24 diagram of the Lockheed “Harvey,” the initial concept for a low radar cross section strike platform that eventually became the F-117.
Download for $3
———————————
CAD 001
A 1/32 diagram of the North American Rockwell D-541-4 “Surprise Fighter” from 1973, an early stealth concept designed to sneak up on Soviet AWACS planes.
Download for $3
Download all seven for $18.90 (10% off)
I’m hurrying to get together the CAD diagram for the May APR Patreon Rewards package. The rest of the reward items are ready to go, but there’s still a little work to accomplish on the diagram. But rest assured it’ll be ready before the end of the month and will be sent out to current APR Patreon patrons. So if you’d be interested in the Lockheed A-1 diagram – which in the largest form is formatted for 18X24 – signed up soon! It’s only a few dollars…
So, check it out…
This website is Star Wars in schematic form. It must’ve taken freakin’ *forever.* It’s definitely worth a look.
A 1977 Rockwell concept for how to expand the utility of the Shuttle system: move the payload from the Orbiter and put it in a shroud ahead of the External Tank. This would have allowed for much larger-diameter payloads to be carried. The ET would of course have had to go into orbit with the Orbiter itself. More info and diagrams of this are in US Launch Vehicle Projects issue 1.
A 1952 film describing the turboprop tailsitter. The film apparently had no audio, so a wholly unnecessary bit of “film projector noise” was added.
The film shows some interesting stuff, such as animations of the craft in action, and artists impressions of what must have been early alternate designs including a ducted-fan design and one with an odd delta wing with a cutout for the props.
Side-view diagram of a Boeing concept for a hydrogen-fueled supersonic bomber from 1956. This monster is shown to scale with a North American XB-70. More info and diagrams of this are in US Bomber Projects issue 9.
