Jul 202013
 

Issue number 1 of US Bomber Projects is now available (for background, see HERE). This issue includes:

  • Rockwell D 645-1: a 1979 low-cost subsonic missile carrier
  • NAA 1495-25 PAMSS: an early ’60’s concept for rebuilding an XB-70 into a prototype for an all-new bomber
  • Boeing Model 701-273-0: First in a series on the evolution of the XB-59 supersonic bomber
  • Convair B-58-C-1: a two-engined tactical bomber
  • Lockheed CL-2102-2: A stealthy flying wing
  • Lockheed Model 195-A-13: An early nuclear powered bomber
  • Martin Model 233-1: First in a series on the evolution of the XB-48… a wartime turboprop medium bomber
  • Boeing Model 444 A: First in a series on the development of the B-52… a late war turboprop heavy bomber

USBP#01 can be downloaded as a PDF file for only $4:
——–

———
usbp01ad

 Posted by at 7:30 pm
Jul 192013
 

More than half a dozen years ago I started working on a book: US Bomber Projects Since World War II. I made some good headway on the research and drafting sides of the effort, and put out a “Preview” to test the waters (which you can still order here. If you haven’t, yer a commie). As with many such efforts, it took much longer than initially expected, started to balloon out of control, helped end my aerospace career and, before too long, became somewhat redundant. When I started working on USBPSWWII, there were no books like that in the world. Lots of Luftwaffe, 1946 stuff, but basically diddly squat about US projects. But before long, reputable publishers started putting out books that covered the basics on USBPSWWII. So since the book was becoming an encyclopedic monster that would not only cover ground other had covered, but would be massively, prohibitively expensive to print, much less buy, I let the project slide into oblivion.

A while back I was talking the project over with a friend, explained why it collapsed. And she pointed out a whole new reason why, instead of letting it be stomped on, I should have charged ahead with it way back when. An important reason, a reason I should have thought of years ago, a terribly motivating reason: spite. And since that’s virtually the only reason why I do much of anything anymore, spiting fate if nothing else, I cracked open the files and started working on it again.

The original plan is still kaput. One great big book that covers, in detail, the evolution of the B-52 and the B-58 and the B-1 would be impossibly large. The original plan was something like Aerospace Projects Review on steroids, with hundred-page articles on a whole bunch of topics, covered in great depth. But a lot of these designs have been covered in the other books that have been published. So… the revived US Bomber Projects will cover the *less* well known designs. Sometimes in my researches I’ve come across designs for which the only documentation is, say, a three-view drawing. In the normal course of things, these designs would be largely left by the wayside since their stories cannot be told with detail and confidence. But now? Heck, those will be the USBP bread and butter. And it won’t be restricted to post-WWII stuff; the war years produced some amazing concepts. There are designs from the 1930’s that really need to be shown.

US Bomber Projects will, instead of one giant book, be a series of short magazines or booklets, covering eight or so designs per issue. The designs in each issue will be unrelated to each other, but there will be “arcs” through the issues. For example, designs leading to the B-48 and B-52 and B-59 are followed from the get-go.

I’ve got the first two issues wrapped up; I need to revise me websites and upload the files, all that mind-numbing necessary stuff. I hope to have #1 and #2 ready for sales within a day. I’m thinking $4 per issue?

usbp01ad

usbp02ad

 Posted by at 10:47 pm
Jul 022013
 

At last: issue V3N3 of APR is now available. The first article covers the proposed use of bombers, specifically the B-52 and B-70, as launch platforms for the Dyna Soar manned military spaceplane.

v3n3dynabomberad2

v3n3dynabomberad1

The second article is on the Martin Astrorocket, a series of early-sixties design studies of reusable low-cost manned launch systems for the USAF.

v3n3astrorocketad

The next article covers the development of the Douglas XC-132 turboprop transport/tanker plane throughout much of the 1950’s. This would have been by far the biggest turboprop plane the us would have built… had it been built. Article contains a number of good photos of the full-scale mockup.

v3n3c-132ad3

v3n3c-132ad2

v3n3c-132ad1

Next is an article on the A-12 Avenger II stealthy strike plane for the US Navy. This article includes info and drawings on the Northrop competitor, as well as a number of rarely seen and all-new detailed diagrams of the A-12.

v3n3a-12ad2

v3n3a-12ad1

A brief article on a trio of Grumman designs from the 1989-1993 time period, VTOL lift-fan combat aircraft, including the Future Attack Air Vehicle (FAAV).

v3n3grumad

Last but not least, an article describing a trio of seemingly unrelated – yet possibly related – designs: a “landing boat” for Project Orion, a lifting body design for the Apollo program, and a fighter jet designed to be launched via booster rockets. Included is information on the logistics Landing Vehicle, General Dynamics’ equivalent of the Douglas ICARUS/Ithacus troop transport rocket.

v3n4llvad

And two “Aerospace History Nuggets,” a Ryan concept for a VTOL jetliner and a concept from Bell for linking two helicopters together to forma  single heavy lifter.

v3n3nuggetad

Here’s the complete issue V3N3 layout:

v3n3promo

It is available in three formats. Firstly, it can be downloaded directly from me for the low, low price of $8.50. Second, it can be purchased as a professionally printed volume through Magcloud; third, it can be procured in both formats. To get the download, simply pay for it here through paypal.

——–

———

To get the printed version (or print + PDF version), visit my MagCloud page:

http://scottlowther.magcloud.com/

——————

Also available: the V3N3 Addendum. This contains 30 pages formatted for 11X17. Includes larger and improved versions of all the CAD diagrams produced for V3N3, including:

  • 1/72 versions of the A-12 diagrams
  • Scans of the original A-12 diagrams
  • 1/144 versions of the XC-132 diagrams
  • 1/288 versions of the XC-132 antecedents
  • 1/250 versions of the Dyna Soar/bomber launchers
  • 1/72 versions of the Landing Boat, “Space fighter” and Apollo lifting body
  • 1/200 version of the Nova/LLV

v3n3addpromo

The V3N3 Addendum can be downloaded for only $3.00!
——–

———

 Posted by at 8:58 pm
Jun 152013
 

NOTE: The cyanotypes have been put on hiatus. They may come back later; if interested, send an email.

 

I have several large format vellum cyanotype blueprints available. These are hand-made items, not run off on a machine. They are made using old cyanotyping techniques and chemicals, on a series of home-made frameworks. the end result is a true royal-blue “blueprint” on vellum paper… with the same appearance and feel of a vintage blueprint.

I’ve made a few of each;  once these are sold out, further prints will be made on demand, so there might be a bit of a delay. The sizes given are of the whole sheet of paper; the diagram itself is a bit smaller, and can be trimmed if you wish. Prints will be shipped rolled.

In order to simplify things, there are two postage options: US and non-US. Doesn’t matter how many of these you get, the one postage fee is all you need to pay (so it makes sense to order a whole bunch of prints at once).
US postage: $6

—————————————————–

non-US postage: $14

—————

18X32 Early Dyna Soar layout diagram: $50.00

blue early x-20

—————-

18X24 German A-4 (V-2) rocket engine: $40

blue a4 engine

—————————————————–

18X24 German A-4 (V-2) layout: $40

blue a4

 

—————————————————–

~24X60 X-20 Dyna Soar layout: $100

A layout diagram of the final version of the Dyna soar, Model 2050E. Same size as scanned original (which was apparently a half-size version of the original original).

blue x-20

—————————————————–

————————–

24X37 Super Hustler (Mach 4 parasite bomber concept): $70

blue super hustler

—————————————————–

~12X73 Saturn V (1/72 scale): $75

blue sat v - x-24c - sat ib

—————————————————–

12×31 X-24C/L301: $30

blue x-24c

———————

~12×44 Saturn Ib (1/72 scale): $40

blue sat ib

—————————————————–

9×24 NERVA art: $20nervaartlarge

—————————–

24X24 X-20 Dyna Soar/Titan IIIc (1/100 scale): $45

dynatitan

 

—————————–

24×31 Wasserfall layout diagram: $60

wasserfalllarge

 

—————————–

12×42 NERVA diagram (two are shown below): $40

nervadiagram

 

—————————–

12X43 Medium V-2 (A-4) cutaway (two are shown below): $40

v2small

 

—————————–

18X62: Large V-2 (A-4) cutaway: $100.00

v2large

 

 Posted by at 2:59 pm
May 312013
 

Finally picked up the final piece – I hope – in the puzzle of making large format vellum cyanotype blueprints reliably and with high quality: a sheet of plexiglass 2 feet wide, 6.5 feet long and 3/8 inch thick. So I hope within a few days – weather and whatnot permitting – I’ll start offering them on a regular basis.

 

 Posted by at 3:56 pm
May 302013
 

Alex Tremulis was an industrial designer. Best known for designing the Tucker automobile, he spent WWII in the Army Air Corps at Wright Field designing advanced combat aircraft. One of the most interesting designs he produced was known as the “Zero Fighter,” a rocket powered interceptor which had a large booster rocket first stage.

I mastered parts for a kit of the Zero Fighter for Fantastic Plastic. FP has just released the 1/48 kit.  I understand that this is a limited run kit, so get yours soon…

Tremulis Zero Fighter (1944)

 

 Posted by at 7:48 am
May 152013
 

I’ve made many test runs and made considerable progress. I’ve also run out of supplies and need to improve the mechanical infrastructure. so I’ve decided to sell the “prototypes” I’ve made. These are indeed  prototypes, and more to the point they are prototypes of art, so they are imperfect and variable… but they’re nevertheless pretty spiffy. These are actual cyanotype blueprints on actual vellum, an they not only look right (based on the vintage blueprints I’ve actually gotten my mitts on), they *feel* right.  The failure rate is pretty high compare to the watercolor paper, but the results are much more authentic.

I currently only have a few of each. If you would like one or more of the following, send an email stating which ones to:   On a first come first served basis I’ll pass along a paypal invoice. Postage (tubes) will be $6 US, $12 everywhere else for any number.

I will update this post with revised availability numbers. When more supplies and improved infrastructure is on hand I’ll make new prints for those that requested them.

Here’s what I have (the 12X18’s were mae two at a time on 18X24 sheets an will be sliced apart):

Img_6572

Convair super Hustler~20X36; $70. On hand: 2 1 0

Saturn V, 1/72: messed up by being a mirror-image. D’oh. Would look good at a distance. This mirror image is $35; the final product will be $75. on hand: 1

Saturn Ib, 1/72: $40 On hand: 1

IMG_6557

A-4 (V-2) layout drawing, 18X24 inches: $40. On hand: 4 3

AImg_6571

A-4 (V-2) rocket engine, 18X24 inches. $40. On hand: 1

Img_6570

ICARUS, 12×18; $20. On hand: 1

Super NEXUS,12×18; $20. On hand: 0

Img_6569

A-4 (V-2) engine,12×18; $20. On hand: 1

A-4 (V-2) layout,12×18; $20. On hand: 1 0

Img_6568

10-meter Orion, 12×18; $20. On hand: 1

NERVA diagram, 12×18; $20. On hand: 1

 

Img_6567

Mercury prelaunch configuration, 12×18; $20. On hand: 2

Fat Man atom bomb, 12×18; $20. On hand: 2

 

Img_6566

Wasserfall layout, 12×18; $20. On hand: 0

Nuclear Light Bulb, 12×18; $20. On hand: 0

Img_6564

Mercury inboard views,12×18; $20. On hand: 1

Mercury capsule instruments, 12×18; $20. On hand: 0

Img_6563

 

Pioneer plaque, 12×18; $20. On hand: 2

Gemini capsule, 12×18; $20. On hand: 5

Img_6562

NERVA art, 12×18; $20. On hand: 0

4,000 ton Orion propulsion module, 12×18; $20. On hand: 1

Img_6561

 

XNJ-1 nuclear turbojet, 12×18; $20. On hand: 3

X-15A-3 delta-wing, 12×18; $20. On hand: 3 2 1

Img_6560

Gemini (see above)

F-1 engine components, 12×18; $20. On hand: 3

Img_6559

Republic ASP exterior, 12×18; $20. On hand: 0

Republic ASP interior, 12×18; $20. On hand: 0

 

 Posted by at 12:03 am
Apr 182013
 

I am working on making cyanotype prints using vellum instead of the heavyweight watercolor paper used to date. This is historically appropriate, as well as being far lighter and rollable (ship in a tube rather than flat). Early test runs are encouraging, though the failure rate is higher than for watercolor paper. I’m going to make vellum-type available alongside the watercolor-paper-type. They will be more expensive, due to higher cost and more effort required. They will probably be special-order items. So if there are any of the current cyanotype prints you’d especially like to see as vellum cyanotypes, let me know via email.

Related: I’ve finally found a company that says they can make large-format transparencies, which I can used to make large-format vellum cyanotypes. I hope to have a set of large format transparencies (including both the Saturn Ib and Saturn V) sometime next week.

 

If it all works out, and things are at least encouraging, then I’ll also be able to make vellum blueprints to order, easily up to 18X24, likely to 24X36, and 14X72 or so (two different “frames” on hand). So if you have diagrams you’d like in velum cyanotype format, let me know…

 

 Posted by at 11:27 am