A “2001 Briefcase Computer” update: there hasn’t been much to say recently, but I’ve completed the rough-cut of the video camera. It’s made from the correct model Japanese telescope, the correct tripod and a scratch-built body with four chrome-plated “knobs.” The black bits are unclear on the prop, but were made from textured 1mm black plastic, recessed slightly into the body. The body here is white; the final versions will be fiberglass and painted to look like aluminum. There is a barely-visible square at the front, presumably a sensor… and an almost invisible square at the back. As currently built the back-square is simply a square of plastic; without further views of the proper, which I doubt are forthcoming, there’s nothing more I can add that would be “canon.” However, that would be the obvious place for switches, controls, etc.
To finish the camera, I need a correct coiled cable. Unfortunately, this sort of thing doesn’t seem to be too common these days. It is larger than a phone headset cable, with the coil appearing to be about 1 inch/ 2.5 cm in diameter. Does anyone know of such a cable? There is no connection between the cable and the camera visible; I suspect on the prop the cable was simply jammed in a hole, glued or even taped on. However, some sort of reasonable “plug” would have to be included. On one hand, a USB plug would seem right… on the other hand, the “2001” aesthetic doesn’t exactly go for “simple and easy to use,” so a nightmarish cable coax fitting would almost seem right.
To compare with:
